Complete Actuator Systems for Nursing Beds, Hospital Beds and Beauty Beds

Most bed builders do not buy actuators one at a time. They buy a matched set: every moving section of the bed gets its own actuator, all of them run from one control box, and the caregiver drives everything from one handset. Below are the three reference configurations from the Zhiheng drive range we stock at HyHaven — a nursing bed, a five-function hospital bed and a beauty bed — with the exact components in each set and what each one does.

System 1: Nursing bed (4 actuators + M07 + H07)

The full-care configuration. Four HH-LA-U9 / HH-LA-U10 actuators — one each for turn over, back lift, leg lift and the toilet hatch — are driven by one HH-CB-M07 control box and one HH-HC-H07 handset.

  • The M07's sockets are labelled by function (turn over / back lift / leg lift / toilet / stand up), and the functions are interlocked, so sections cannot be driven into each other.
  • The H07 handset carries 14 keys for every function, including automatic timed turning, one-key sit-up and reset, voice prompts, night-glow keys and a built-in emergency stop key.
  • If an actuator is pushed past its rated load, the system cuts it off automatically.
  • Power failure: specify the manual-release HH-LA-U9-2 for the sections that must come down in an outage, and staff can wind them down by hand crank.
  • One hard requirement: the M07 runs on AC 220V input (DC 24V output), so this set is for 220V markets such as Europe.

System 2: Five-function hospital bed (4 actuators + M03 + H05)

The export-friendly configuration. The same four U9/U10 positions — turn over, back lift, leg lift, toilet hatch — run from one HH-CB-M03 control box and one HH-HC-H05 handset.

  • The M03 accepts 110–240V AC input, so one bed design ships to both 110V and 220V markets without changing the drive system.
  • It drives one to four actuators, so the same box also covers simpler two- or three-function beds.
  • The H05 handset offers up to 10 keys and up to IP66 sealing, with an optional backlight.

System 3: Beauty and treatment bed (3–4 actuators + M03)

Salon and treatment beds need fewer, quieter movements: back lift, leg lift and height or tilt, without the care functions. The reference set is three to four U9/U10 actuators on the same M03 control box and handset as System 2 — one shared platform across your bed range, so spares and training stay simple.

The actuator at the centre of all three

Every set is built on the same unit: 6,000 N push force, 24V DC, 4 mm/s under load in the stocked grade, strokes from 100 to 400 mm in 50 mm steps, IP54 sealing, built-in limit switches and a 10% duty cycle rated for the short positioning movements beds make all day. U9 and U10 share the platform and differ in mounting arrangement, so they can be mixed on one bed section by section. Every actuator carries a 12-month warranty.

Sizing a bed position by position instead? Our medical and nursing bed actuator guide maps each movement — back, legs, lift, tilt — to its actuator and control route in detail.

How to order a set

The components are listed individually on the product pages linked above, and complete sets are quoted as a package: tell us the bed type, the functions you need and your mains market (110V or 220V) at support@hyhavenstore.com or on WhatsApp, and we will confirm the configuration — actuators, strokes, control box and handset — before you order. If you are replacing the drive system on an existing bed, send photos of the current actuators and control box so we can match the system instead of guessing.

FAQ

Can I buy the nursing bed set exactly as listed? Yes — the four actuators, M07 box and H07 handset are all stocked lines. Tell us the stroke needed at each position and we will quote the set as one package.

What is the difference between System 1 and System 2? The control route. System 1 uses the dedicated five-function medical box (M07, 220V input, 24V system, function-labelled sockets, voice handset). System 2 uses the wide-voltage M03 (110–240V input, 29V system) with the H05 handset — fewer care-specific functions, but one design works in every mains market.

Can a set mix U9 and U10 actuators? Yes. They share force, speed and voltage; choose per section according to how the frame mounts.

Are these certified medical devices? They are drive components for bed manufacturers and refurbishers. Certification of the finished bed remains the bed manufacturer's responsibility; full component specifications are published on each product page for your compliance team.

Back to Home