HyHaven HH-CB-M07 Medical Bed Control Box | 5-Function | DC 24V Output | AC 220V Input

The HH-CB-M07 is the five-function medical bed control box of the Zhiheng medical control system. One box drives five actuators and one handset — turn over, back lift, leg lift, toilet and stand up — the control core of multi-function nursing and hospital beds, with a built-in voice prompt and fuse.

Specification

• Input: AC 220V, 50/60Hz
• Output: DC 24V
• Controls: 5 actuators, 1 handset
• Functions: 5 — turn over, back lift, leg lift, toilet, stand up
• Actuator sockets: 8-pin 6-core (turn over), 4-pin 5-core (back lift), 8-pin 6-core (leg lift), 4-pin 5-core (toilet), 4-pin 5-core (stand up)
• Handset socket: 5-pin 6-core
• Fuse: Built-in
• Voice prompt: Built-in
• Colors: White / Grey
• Control board: 161.32 × 119.32 mm (PCB, see interface drawing)

Important: the input voltage of this version is AC 220V only. It does not run on 110V mains — check your supply before ordering, and message us if you need a different input version.

Configuration note: the electrical build is matched to your bed configuration. Message us with the number of actuators and the functions you need before ordering, and we will confirm the right build.

Compatibility: made for 24V HyHaven actuators (HH-LA-U9 and HH-LA-U10) in multi-function nursing and hospital beds, and pairs with the HH-HC-H07 handset. It uses Zhiheng medical multi-pin sockets and is not compatible with HyHaven's 12V/24V U-series actuators (U1-U8, U11) or the 24V wired/wireless control kits sold for them.