Air shipping · $10 under $59 · Free at $59+ · Est. 5–8 business days after dispatch

HyHaven HH-LA-U8 Linear Actuator | Up to 4000 N | 12V/24V DC | IP54

Model number HH-LA-U8

Force4,000 N / 899 lbf
Voltage 12V / 24V DC
No-load Speed 5 mm/s no-load 5 mm/s no-load
Load Speed 3.5 mm/s at 4,000 N load (5 mm/s gear)
IP Rating IP54

$145.00 USD

~~$199.99 USD~~ $145.00 USD

Sale Sold out

Air shipping to the United States, Belgium, Germany, Spain, France, Italy, and the Netherlands. Orders under US$59: US$10 shipping. Orders of US$59 or more: free air shipping. Estimated delivery: 5–8 business days after shipment; timing may vary by destination. Shipping details

Shipping to a remote or island address? Check delivery coverage by postal code before ordering.

Some remote postal codes and island destinations—including Alaska and Hawaii, the Canary Islands, and certain French overseas regions—may have different delivery availability or timing. Before ordering, contact us with your full ZIP or postal code so we can confirm whether our air-shipping route serves your address and the total shipping cost. We will not add any extra shipping charge without your approval. If we cannot serve your address, we will contact you before dispatch to arrange a solution or refund.

Quantity

The HyHaven HH-LA-U8 is a compact DC linear actuator for projects that need controlled push and pull motion. Choose a 12V or 24V configuration and the speed and stroke that fit your mechanism. Force depends on...

Technical Specifications

Force 4,000 N / 899 lbf
Voltage 12V / 24V DC
No-load Speed 5 mm/s no-load
Load Speed 3.5 mm/s at 4,000 N load (5 mm/s gear)
Stroke Length 50–450 mm / 2–17.7 in, in 50 mm increments
IP Rating IP54
Limit Switch Built-in end-of-travel limit switches

Key Product Features

Compact Heavy-Duty Force | Up to 4,000 N push and 3,800 N pull in the 5 mm/s gear, with self-locking that holds position when power is off.
One Standard Gear, More on Request | The standard build runs the 5 mm/s gear for the full 4,000 N of force. Need a faster gear — 10, 15 or 26 mm/s? Message us for a custom order.
Nine Stroke Lengths | 50 to 450 mm in 50 mm steps, with custom strokes from 15 to 1,000 mm on request.
Sealed to IP54, Under 40 dB | Dust- and splash-resistant housing, built-in limit switches, quiet running.
Support That Answers | Covered by a 12-month warranty — reach us at support@hyhavenstore.com or on WhatsApp.

Key specifications

DC brushed motor, 55 W; 12V or 24V options
Current: 0.7 A no-load / 7 A full-load at 12V; 0.4 A no-load / 4 A full-load at 24V
Speed: 5 mm/s no-load on the standard build (10, 15 and 26 mm/s gears available as custom orders)
Maximum push force by speed: 4,000, 2,000, 1,500, or 800 N respectively
IP54 protection against dust and water splashes; not for immersion or direct water jets
Aluminum alloy gearbox and inner/outer tubes; nylon worm gear
Built-in limit switches; listed noise below 40 dB
Custom stroke range: 15–1,000 mm. Stroke is fixed after manufacture.

Speed and force

The standard build uses the 5 mm/s gear; the other gears in this table are available on custom orders — contact us before ordering.

No-load speed	Loaded speed	Max push	Max pull	Max self-lock
5 mm/s	3.5 mm/s	4,000 N	3,800 N	4,000 N
10 mm/s	7 mm/s	2,000 N	1,800 N	2,000 N
15 mm/s	10 mm/s	1,500 N	1,200 N	1,500 N
26 mm/s	20 mm/s	800 N	600 N	800 N

Installation sizing

For strokes below 300 mm, the listed installation length is stroke + 110 mm. For strokes of 300 mm or longer, use stroke + 120 mm; a 300 mm stroke therefore measures 420 mm by this rule. Confirm mounting clearances and the final drawing before ordering a custom stroke. It uses Ø8.1 mm mounting holes at both ends.

Factory literature lists a 10%–20% duty cycle, an operating temperature range of -20°C to 60°C, and an estimated service life of 20,000–30,000 cycles. Confirm the exact selected configuration before purchase.

Warranty: 12 months

View full details

From $145.00 Request a quote

Compact Heavy-Duty Force

Up to 4,000 N push and 3,800 N pull in the 5 mm/s gear, with self-locking that holds position when power is off.
One Standard Gear, More on Request

The standard build runs the 5 mm/s gear for the full 4,000 N of force. Need a faster gear — 10, 15 or 26 mm/s? Message us for a custom order.
Nine Stroke Lengths

50 to 450 mm in 50 mm steps, with custom strokes from 15 to 1,000 mm on request.
Sealed to IP54, Under 40 dB

Dust- and splash-resistant housing, built-in limit switches, quiet running.
Support That Answers

Covered by a 12-month warranty — reach us at support@hyhavenstore.com or on WhatsApp.

U8 highlights

HyHaven HH-LA-U8 Linear Actuator | Up to 4000 N | 12V/24V DC | IP54

4,000 N / 899 lbf

Force

Standing desks

TV lifts

recliner sofas

adjustable beds

food trucks

scissor lifts

motion platforms

nursing beds

Technical details buyers can scan quickly

Force	4,000 N / 899 lbf 4,000 N / 899 lbf
Voltage	12V / 24V DC
Stroke	50–450 mm / 2–17.7 in, in 50 mm increments
No-load Speed	5 mm/s no-load 5 mm/s no-load
Load Speed	3.5 mm/s at 4,000 N load (5 mm/s gear)
IP Rating	IP54
Limit Switch	Built-in end-of-travel limit switches

Dimension Drawing

Mechanical dimensions and mounting reference information.

Download Dimension Drawing View Dimension Drawing

Standard: 12V/24V DC, 50–450 mm stroke. Contact us to confirm other speed gears (10, 15, 26 mm/s) or custom 15–1,000 mm stroke configurations.

Worldwide OEM/ODM, distributor, and project inquiries are welcome. Shipping availability and terms are confirmed for each destination.

Request a Quote Contact Us

OEM / ODM solutions

Support product customization for distributor programs and private-label project needs.

Volume pricing for distributors

Ask about volume pricing for recurring supply, project buying, and distributor orders.

Engineering support available

Get help with application fit, product selection, and system integration questions.

Request a Quote

Tell us about your project

Use this form to request a quote or project support.

Item added to your cart